耐事故UO2基复合燃料芯块的研发进展

对先进耐事故燃料（ATF）芯块的研发背景进行了概述，重点讨论了耐事故UO₂基复合燃料芯块的国内外研究现状，认为UN、U₃Si₂和ThO₂等燃料相是耐事故UO₂基复合燃料芯块中最具发展潜力的掺杂相，然而其最佳添加量及分布状态尚需结合多尺度数值模拟和实验研究的方法开展深入探索。      

Assessment of plastic damage in high strength structural steel using electromagnetic technique

ABSTRACT

High strength structural (HSS) steels are widely used in many construction equipment and infrastructures. Currently, there is a substantial demand of Non-Destructive Testing of these steel structures. In this research, the electromagnetic technique was utilised to assess the plastic damage in a typical HSS steel (i.e. Q690 steel). The results showed that the magnetic hysteresis loop of this material changed apparently after the tensile deformation, and the relevant magnetic parameters such as coercivity, remanence, and maximum permeability were sensitive to the cumulative plastic strain. The results demonstrated that there is a good coherence between the plastic damage evolution and the magnetic parameters variation, which indicated that the electromagnetic technique is an effective method to assess the plastic damage of HSS steel.     

New analytical approximate solution of the generalised temperature integral for kinetic reactions

Simple closed-form expression of the generalised temperature integral in the basic equation to describe kinetic reactions for solid materials in linear heating process is always suitable for use in determining parameters. Many developed solutions only can give high accuracies on the general conditions. A new analytical approximate solution was deduced in this work. The deviations of this solution from the true value are fully analysed. This solution takes advantage in broader application conditions than other known solutions. The application of the new analytical approximate solution in austenite kinetic reaction in this work reinforces that austenite reaction rate is feasible to be given a priori.     

对称消声器传递损失测量及误差修正

为了提高对称消声器传递损失的测量效率，基于声学理论分析，提出了一种单负载法传递损失计算模型。针对反射系数较大的吸声末端，导致该方法在实际测量中存在较大误差的问题，推导出了一种能够消除测试管道末端反射声波在上、下游形成多次反射的修正公式。通过自制阻抗管进行试验测试，结果表明：在末端声学负载吸声性能良好的情况下，单负载法传递损失计算模型能够精确计算出对称消声器的传递损失；修正公式能够有效地消除末端负载所引起的反射波对传递损失计算的影响，降低对末端声学负载吸声性能的要求，保证单负载传递损失计算模型的适用性。     

强织构铝合金残余应力检测技术研究

在铝合金轧板的残余应力研究中，由于其强烈的轧制织构，无法使用常规的X射线sin2 ψ法进行残余应力分析。以2A97铝锂合金轧制板材为研究对象，使用X射线衍射法测量材料的取向分布函数，结合Ruess、Voigt、Neerfeld-Hill模型，从理论上计算不同假设条件下材料的宏观弹性常数，得到材料表面的宏观残余应力。实验结合盲孔法进行对比验证，结果表明Neerfeld-Hill模型的残余应力分析结果与盲孔法所测结果相互吻合，建立织构材料的宏观残余应力分析方法。     

Oxidation behavior and high-temperature flexural property of CVD-SiC-coated PIP-C/SiC composites

Polymer infiltration pyrolysis (PIP) was used to prepare carbon fiber-reinforced silicon carbide (C/SiC) composites, and chemical vapor deposition (CVD) was employed to fabricate SiC coating. The oxidation behavior at 1700?°C and the flexural property at 1200?°C were tested. SiC coating exerted remarkable oxidation effects on PIP-C/SiC composites. In the absence of coating, PIP-C/SiC composites lost 29.2% of its mass, with merely 6.74% of the original flexural strength retained. In contrast, CVD-SiC coated PIP-C/SiC composites had the mass loss of 10.2% and the flexural strength retention ratio of 23.4%. In high-temperature tests, SiC coating played an important role in the flexural strength of PIP-C/SiC composites. The flexural strength of uncoated composites became 330.7?MPa, and that of coated ones reduced from 655.3 to 531.2?MPa.     

简捷水热法制备氟化石墨烯及其表征

氟化石墨烯是一种石墨烯衍生物,在润滑材料、电子器件等领域具有广阔的应用前景。采用回流搅拌并水热还原的方法制备氟化石墨烯,并在不加HF的情况下以同样的方式制备了水热还原的还原氧化石墨烯(rGO)。采用傅里叶变换红外光谱(FTIR)、X射线衍射(XRD)、拉曼光谱(Raman)、X射线光电子能谱(XPS)、透射电镜(TEM)等对样品进行形貌观测和表征。FTIR的结果表明氟化产物中含有C-F键和部分未完全还原的含氧基团;由XRD谱可以看出,产物晶型较差,其层间距和原料的性质有关;Raman谱证实了石墨烯的基本结构依然存在,但也存在大量缺陷,并且rGO比FGS的规整度略高;XPS谱表明样品表面有氟元素的存在,意味着FGS制备成功;TEM结果显示该样品为单层和少层。该方法操作简单、原料廉价易得、工艺要求不高,适用于批量生产氟化石墨烯。